Recent Mold Remediation Posts

Our Professionals Will Help You Decide What Needs To Be Disposed Of After Mold Damage In Jacksonville

2/7/2019 (Permalink)

Mold Remediation Our Professionals Will Help You Decide What Needs To Be Disposed Of After Mold Damage In Jacksonville Mold can cause permanent damage to items in your home our team will restore what they can and help you sort out the rest.

Some Household Items become Unusable when Mold Damage Strikes a Jacksonville Home

While SERVPRO professionals save Dallas residents from thousands of dollars in losses through their mitigation efforts, some belongings just cannot survive the ordeal. We promise we do our best with each item, although certain ones require automatic disposal after certain disasters. 

When your home in Jacksonville becomes host to mold damage, some items cannot survive such a microbial invasion. For these items, you must purchase replacements. One of the more expensive items includes mattresses. We can often mitigate damage from microbes on box springs, although this might require removal of the sheet underneath. Mattresses, however, contain too many fibrous materials to allow us to keep costs low enough to warrant cleaning such items. Also, there is little way of knowing for certain that we have removed all microbes. Hence, industry standards recommend the disposal of these items. 

Other furnishings include some upholstered furniture. While the non-textile parts can become adequately microbe-free, foam cushions can harbor spores and cause subsequent problems. A similar situation occurs with carpets and pads. We can launder smaller area rugs, but carpeting, like padding, contains too many pores and openings where microbes, spores, and other microscopically sized unwanted substances can remain, even after the most exhaustive efforts. 

We remove these materials and place them as losses on our inventory sheets. We provide our customers with copies of each sheet to help you with making a claim to your insurance adjuster. Other items that mold and mildew damages can leave them unusable merely because of the staining left behind. Removing the stains on some of your belongings can make them worthless. Wooden instruments are one example. While they may sound like they should after only surface cleaning, the stains make them ugly and embarrassing. For unique items like this, we work with you closely to make sure you are satisfied with our efforts and understand the limitations and possible outcomes of each method we can employ in remediating mold damage

SERVPRO of Arlington wants to help residents in Glynlea, Regency, and St Nicholas with practical measures to combat mold damage wherever it occurs. Your belongings and household furnishings are just as important as your home's structure. Call us at (904) 721-2230 for answers to your questions and to start the process of protecting your home. 

Check out one of Jacksonville's favorite places click here for more information.

SERVPRO Wants To Restore Your Arlington Home

1/4/2019 (Permalink)

Mold Remediation SERVPRO Wants To Restore Your Arlington Home Call the experts to remove mold immediately when you spot it in your home.

Mold Damage Experts In Arlington Talk About Sodablasting

Fungi can develop inside your Arlington home any time there is excessive moisture added to a structure. Once organic substances inside your house stay wet for more than 48 hours, it is possible that mold damage can occur. Fungi usually start forming in dark, confined spaces making sometimes hard to find. Once materials get contaminated, the hyphae form root-like anchors that dig deep into the material and adhere to it. The hyphae then release spores into the air so that the fungus can reproduce and attempt to create mold damage in other areas.
 
Once something gets contaminated, it is wise to call in a professional restoration company like SERVPRO so that we can find and mitigate all of the issues present. Since there are a thousand different types of fungi each mold damage situation in Arlington is different. Some contamination can be easily wiped or scrubbed off of surfaces while other types of fungi can be difficult to remove. In some more severe cases, the hyphae grow all the way into materials like wood or drywall and affect both sides. When this happens, the items usually get discarded and replaced.
 
In some situations, there are methods that can be used that do not damage the surface of the material. One method called soda blasting uses sodium bicarbonate or baking soda to remove mold from surfaces such as drywall or wood. If the proper techniques get implemented, our SERVPRO technicians can remove contamination with minimal damage, waste, and cleanup.
 
When the baking soda gets blasted onto a contaminated surface, it removes the formations as well as killing the reproductive spores. The soda blasting can be effective on just about any surface. The baking soda also absorbs any malodor particles helping neutralize any foul smells. The process is eco-friendly and is easy to clean up once finished. If you ever notice a water leak that has gone unnoticed or the presence of mold inside a place like your attic, call SERVPRO of Arlington at (904) 721-2230 24 hours a day and seven days a week. Click here for more information on the top 4 attractions to see when visiting Arlington.

When Foul Odors Plague Your Mold Damaged Arlington Home You Need Our Team At SERVPRO

12/26/2018 (Permalink)

Mold Remediation When Foul Odors Plague Your Mold Damaged Arlington Home You Need Our Team At SERVPRO Mold damage can affect your home in many ways, and having the right professionals can make a quick difference to the recovery of your property.

Removing Odors From Materials In Mold-Damaged Arlington Homes

Many Arlington homeowners might not realize that some disasters provide concise warnings and symptoms to indicate damage is occurring to the property. Mold growth, for example, might not always be in an accessible area that you can see easily. Many homeowners only realize there is cause for concern when they encounter a harsh musty odor in certain areas of their home. This same scent can be challenging to remove without the appropriate equipment, and our team has multiple options for removing it from the affected areas of your house.

Indoor air quality is significantly affected by mold damage in your Arlington home. Even beyond the lingering odor spread throughout the impacted areas of the house, the colonization of mold presents potential airborne hazards that must also get addressed by our SERVPRO remediation specialists that arrive at your property to begin the removal and restoration process.

Addressing the potential health hazards present in the environment from the mold growth begins with the removal of overly damaged structural elements and contents of your home. Some of these contents can get removed to a nearby facility for focused cleaning, disinfection, and deodorization by our SERVPRO Contents Department. Air scrubbers and negative air machines constantly run throughout this process inside of physical containments designed to prevent the spread of airborne spores and volatile organic compounds from reaching new areas.

Removing the harsh odor that gets emitted from the colonies, our professionals utilize equipment like our thermal foggers. These machines release an odorless chemical compound designed to neutralize the present molecules and leave no discernable odor behind. This approach can get used for open areas affected by the musty scent but is also ideal for use on softer materials also affected such as clothing, carpets, furniture, drapery, and more.

Mold damage can affect your home in many ways, and having the right professionals can make a quick difference to the recovery of your property. You can always count on our SERVPRO of Arlington applied microbial remediation technicians to work fast and remove this threatening organism from your house. Give us a call today at (904) 721-2230.

Click here for more about Arlington.

Mold Has No Place To Hide In Your Jacksonville Home!

10/30/2018 (Permalink)

Mold Remediation Mold Has No Place To Hide In Your Jacksonville Home! Sometimes fungal growth can take place in the most unexpected tight spots inside your Jacksonville townhome.

Technicians In Jacksonville Handle Mold Damage Scenarios In Some Of The Strangest Places

Sometimes fungal growth can take place in the most unexpected tight spots inside your Jacksonville townhome. In many cases, if your residence suffers from mold damage, it could be longer than you think before you realize that you have a problem. Fungi can develop in any area where organic materials are present, and that stays around the typical room temperature if excessive moisture is added to the scenario. It takes 48-72 hours for most kinds of fungal contamination to develop once water comes into contact with materials like wood or paper. Once a fungus has formed, it creates reproductive spores that can spread the mold damage to places far away from the original problem's source.

Mold can cause health effects with some people, so it is wise to prevent the activation of microbes whenever possible. However, since spores exist naturally in many places, as soon as they come into contact with moisture, they are likely to turn into a micro-organism that can cause mold damage to your Jacksonville home at some point in time. If a pipe breaks or water makes its way in from the outside, your building immediately risks suffering dangerous fungal contamination. Once a fungus pops up, it forms structures labeled as "hyphae" that grow in every direction. These formations release the microscopic spores that allow the organism to reproduce.

The main issue with mold is that it usually is found in the most unexpected places. Mold likes water, organic substances, and warm temperatures as well as sites that receive less sunlight than other locations inside a structure. This means that anytime our SERVPRO team gets called out to inspect a property that is possibly contaminated, we search everywhere to find the problem and its source.

When attempting to find a problem with an unknown location, we look in places that are close to water sources and those that are not necessarily seen every day. Our IICRC certified SERVPRO technicians know where mold is likely to form and we will look under, in between and around your building materials and contents to get to the bottom of the problem. If you ever suspect you might have an issue with fungi even though you cannot see it, call SERVPRO of Arlington at (904) 721-2230 so that we can give you a professional yes or no answer.

Click here for more about Jacksonville.

Why HVAC Systems in Jacksonville Get Mold Damage Easily

8/8/2018 (Permalink)

Mold Remediation Why HVAC Systems in Jacksonville Get Mold Damage Easily SERVPRO Remediates Mold Growth in HVAC Systems in Jacksonville Homes and Businesses

SERVPRO Can Remediate Mold in Jacksonville Properties' Ductwork

Some familiar places to find significant mold damage in a Jacksonville home is inside the heating, ventilation, and air conditioning system running through the building. While mold can find its way into any corner and place in and around the structure, HVAC systems are at a much higher risk of fungal growth than most other areas. Because mold in an HVAC system requires advanced care like that provided by SERVPRO to eliminate, the best path is to understand why it tends to grow in those places and take steps to mitigate those factors.

Why Mold Grows in HVAC Systems
Perhaps the single biggest determiner of where mold damage spreads in a Jacksonville home is the nature and general status of the environment it takes root in. HVAC systems create climate-controlled, dark, undisturbed spaces with many filters, vents, and walls lined with dust and organic materials - ideal conditions for an aspiring fungal colony. While moisture is also a key determinant of whether or not mold can grow in an area, the year-round humidity in and around Jacksonville means that this factor is less crucial than in other parts of the country. Mold grows best in vents that have as little air movement as possible, especially those that are used continuously but rarely see their filters replaced.

How to Prevent Growth
The most impactful way to control mold growth in your HVAC system is to ensure that it receives regular maintenance and upkeep. Replace old filters before they fill with dust and debris to ensure that air moves fast and clean throughout the home. While it may be tempting to put off a replacement for an extra few months or years, the hassle from taking care of replacements is undoubtedly less than the strains that come with a call to SERVPRO for a full mold remediation project.

If you sense mold is present by the odor or staining in your home, we can inspect your ductwork, and if needed, clean them and disinfect them against mold growth.

SERVPRO of Arlington provides fast and inexpensive mold damage remediation services for homeowners in the area. Give us a call for 24/7 services or a quote at (904) 721-2230.

Click to visit this vacationland.

Removing Mold Colonies From Your Jacksonville Home

5/25/2018 (Permalink)

Mold Remediation Removing Mold Colonies From Your Jacksonville Home No matter the severity of the mold infestation, our SERVPRO team will be there to help and remediate.

Remediating Mold From Your Jacksonville Property is  Easy With The Help of SERVPRO

Once mold has gotten discovered in a Jacksonville home, many homeowners seek to take care of the problem as efficiently as they can. While for some this means attempting to remove the present colonies on their own, most concede that to remove the colony and the presence of the mold entirely, professional remediation is a necessary step to take.

When it comes to removing and remediating the mold damages in your Jacksonville home, our professional restoration team seeks to limit the spread of this colony to new areas. This process allows our SERVPRO remediation specialists the opportunity to get to work on removing the mold colonies from the organic material it has seated itself on.

To remove these colonies where they get found, several possible approaches might get taken. Our team of SERVPRO professionals often first sprays the affected material down with an antimicrobial solution. This spray deeply penetrates the porous construction materials housing the colony and can work to reduce the entire hyphae with subsequent steps to follow.

There are some instances in which hard scrubbing on the surface can remove the fledgling mold colonies, yet often, more invasive measures are necessary. Sanding and soda blasting allow our team to get into the pores of the material to remediate the mold damages.

When mold damage has persisted for an extended period, the severity of the damage to construction materials and structural components of your home might be too considerable to overcome. In these cases, the only suitable solution is to remove these elements and replace them with new materials. Controlled demolition gets used here to limit the removal of materials to only the severely affected portions rather than to deconstruct entire areas of your home.

Locally Owned Company with National Resources

While mold damages can often be overwhelming to discover in your home, there are always going to be qualified and certified applied microbial remediation technicians at SERVPRO of Arlington to help you overcome them. Our team is available anytime that you need us by calling (904) 721-2230.

For more on Jacksonville, click here.

Control Mold Damage Found in Your Arlington Home

3/11/2018 (Permalink)

Mold Remediation Control Mold Damage Found in Your Arlington Home Mold damage can be minimal or extensive. In either case, contact our SERVPRO technicians for remediation and possible future prevention steps.

SERVPRO Technicians Understand Mold and the Impact That it Can Have on Your Home

Regardless of who you are, where you live, or your station in life, if you are a homeowner, you are likely to have had to deal with mold at some point. Having a mold infestation on your Arlington property can be a worrisome and time-consuming experience. However, it does not have to be.  

We want to help you learn more so that you can prevent mold damage in Arlington and control your home’s living environment, better. With that said, please take the time to review our list of things to know about mold growth, and make contact with a professional mold remediation company, like SERVPRO, should a situation arise in your home.  

1. Mold is a naturally occurring fungus that serves a vital role in helping organic matter decompose, recycling many materials back into our ecosystem.

2. Mold can cause health effects. Never take chances, contact a professional and avoid exposure to mold found in your home.

3. Mold damage and water damage go hand-in-hand. Make sure the company you hire offers a full-service solution.

4. Regardless of the company or methods used, no one can eliminate mold from your home entirely.  

5. A quality technician knows that the best way to control mold growth in your home is to manage water, moisture, and condensation found on your property.  

6. Water leaks found in your attic, basement, walls, or plumbing fixtures should always be taken care of immediately.

7. You can decrease the potential for condensation by having insulation added to your windows, piping, roof, floors, exterior walls, and additional high condensation areas.

8. The type or amount of mold found on your property has no impact on how a licensed professional addresses the situation.

SERVPRO has a variety of mold and water damage restoration services available 24-hrs a day, 7-days a week. We provide you with fully-certified IICRC technicians who can help you understand your situation and perform a complete inspection of your home. Using a variety of cleaning and restoration services, our technicians help return a clean, healthy living environment you and your family can trust.

SERVPRO of Arlington can help you learn more about preventing mold growth in your home, just give us a call, today. (904) 721-2230

Click here for more information on the city of Arlington.

Professional Mold Damage Remediation Available To All Jacksonville Residents

2/9/2018 (Permalink)

Mold Remediation Professional Mold Damage Remediation Available To All Jacksonville Residents At SERVPRO of Arlington, we can remediate your mold infestation "Like it never even happened."

Let SERVPRO Help You Tackle Mold in Your Jacksonville Home

Jacksonville homeowners who experience a water intrusion of any kind can also experience mold infiltration in their home. Putting a hold on repairs or delaying the process for personal reasons can lead to unseen mold growth.

As many of you know, insurance companies have tightened their policies concerning mold damage in your Jacksonville area home caused by sudden leaks, fire control methods, storms, or even floods. They want you to have specific coverage, paying additional premiums, to get the help you need to combat mold.

It is imperative for homeowners to contact their insurance company to ensure they have the proper coverage for any events they feel might be a problem. You want to avoid paying out-of-pocket for these expenses, which is why it also helps to have a pre-existing relationship with a quality restoration company you can trust.

SERVPRO can perform a full inspection of your property, locate any existing problems, and help you prevent future incidents of mold growth. By installing additional ventilation, drainage, and moisture control methods throughout your home, we help you take control of your living environment.

SERVPRO also has access to the proper personnel, advanced cleaning and restoration equipment, as well as a vast network of local resources to handle any size job. We have humidifiers, hygrometers, infrared moisture detectors, foggers, air-movers, and professional IICRC-industry certified technicians who understand how important it is to perform quick, efficient services in your home.

SERVPRO technicians make every effort to contain and control mold found in your home. We use a variety of services to prevent the spread of spores to additional areas and prevent personal exposure throughout your remediation process. We utilize personal protective equipment and follow strict local, state, and federal guidelines concerning the transport and disposal of contaminated materials and maintain a clean, safe working environment.

Locally Owned Company with National Resources

Contact SERVPRO of Arlington for access to professional mold remediation services you can trust, 24-hours a day, 7-days a week, year round – including holidays. Our entire Green Fleet is standing ready to deploy to serve, you. (904) 721-2230

For more on Jacksonville, click here

Combating Kitchen Mold In Your Jacksonville Home

12/29/2017 (Permalink)

Mold Remediation Combating Kitchen Mold In Your Jacksonville Home Several factors contribute to mold damage occurring in your Jacksonville’s home kitchen.

Mold In Your Kitchen

When people think about the possibility of mold in their Jacksonville homes, they usually think about dark and moist areas like the basement. Surprisingly, this is not the only area of your home that might have to contend with the production of mold. Kitchens are another breeding ground for this fungus, which could go unchecked in the hustle and bustle of your daily life.

Several factors contribute to mold damage occurring in your Jacksonville’s home kitchen. The first of these would be the presence of moisture on a regular basis. Water in the air is a significant catalyst for the seating of mold spores and allows them the proper conditions to grow and thrive. Once you stop and think about it, many circumstances generate a lasting moisture in the air when you cook, bake and clean your kitchen.

While our licensed SERVPRO Applied Microbial Remediation Technicians are well equipped to contend with existing colonies and to remove them, there are some steps you can take to prevent this occurrence potentially. The first is to have proper ventilation of the room. With an exhaust system or moving air regularly pulling moisture from the room, spores are not as likely to be able to bed down into colonies.

Reducing the moisture in the air is another method you can take to prevent our SERVPRO technicians from having to remediate the present mold in your kitchen. Moisture reduction happens by ensuring that the ventilation system that you have in place is running optimally when you are doing tasks in the kitchen that generate steam or high heats. That coupled with the already commonly humid Jacksonville weather conditions can create additional moisture in this area of the house.

There is also the understanding the existence of mold is not always readily remedied through conventional cleaning processes. Often, the fungus you can see with the naked eye is only a small part of the entire organism. This whole colony, or hyphae, plunges deep into the material it has formed on, which leaves full removal something that you are highly unlikely to do on your own.

Mold damage can result in health effects, which is another good reason that you should call our experienced team at SERVPRO of Arlington. We can be reached any time of the day at (904) 721-2230.

Click here for more about the city of Jacksonville.

Finding Mold Damage in an Arlington Property can Indicate One-Time or Ongoing Leaks

10/9/2017 (Permalink)

Mold Remediation Finding Mold Damage in an Arlington Property can Indicate One-Time or Ongoing Leaks Regardless whether mold is visible or hidden with only a musty smell to alert you to its presence, SERVPRO technicians can assess and remediate.

Our Certified Technicians Expertly Investigate a Mold Infestation to Find the Cause Before Remediating the Damage

Water in your home can pose problems if it ever finds its way out of its normal, safe locations. Leaks, drips, overflows, and spills can all happen in your Arlington home. Some of these occur once or might continue unabated for months on end.

Homes can suffer from mold damage in Arlington near water-logged areas. Discovering your home has mold growth can seem a horrific discovery but it can also help inform you of a different problem. Water lost through leaks and drips can increase your monthly bill. Overflows from toilets can indicate a sewer backup problem that might eventually worsen. Being more careful can prevent spills from buckets while cleaning or when young children drink from sippy cups and bottles.

We train our technicians to look for clues inside each home that can tell them more about the cause behind mold damage. Mold exists everywhere but only grows where conditions permit this microbe to flourish. When those conditions disappear, growth halts and mold becomes dormant.

Part of our work includes stopping the water from entering your living space. Finding the continual leaks and drips that plague your home can prevent future mold growth and damage, and also lower your bill. Discovering that microbial growth is proliferating due to remnant humidity from a one-time overflow that may have occurred months ago means dehumidification can help resolve the issue.

Restoring dryness can help immensely in both situations. Depending on the level of humidity, we use desiccant machines, heaters, and air movers, in addition to dehumidifiers. When humidity levels become normal again, we can spray any areas at risk of mold regrowth with anti-microbial treatments.
 
SERVPRO of Arlington's technicians are skilled mold damage remediation experts who can restore your home, so it is “Like it never even happened.” Contact us at (904) 721-2230, anytime, day or night, 365 days a year.

For more information regarding Arlington, click here

Small Changes Result In Mold Damage Reduction In Arlington

7/19/2017 (Permalink)

Mold Remediation Small Changes Result In Mold Damage Reduction In Arlington Persistent mold damage plagues you in your Arlington home.

Mold Damage Reduction

In Florida, mold growth is hard to abate. High humidity, closed up homes, poorly maintained or improperly sized air conditioning systems, and a host of household habits encourage mold colonies in the Sunshine State. SERVPRO stresses common sense solutions to keep mold growth at bay but also offers high-quality mold remediation services.

Persistent mold damage plagues you in your Arlington home. No matter what you do, it seems impossible to keep the musty smell and spreading colonies from reoccurring. Although we provide mold containment and removal through our well-trained technicians, we understand that mold is always present in the indoor and outdoor environment. Mold remediation is not complete until the source of moisture feeding the fungi is eliminated.

With that in mind, follow these tips to manage the moisture in various areas and appliances of your home that contribute to mold growth.

Laundry Area
Do not allow sweaty clothes or damp towels, dish or washcloths to pile up. Launder clothes and linens frequently and dry them thoroughly. Keep the lint trap and vent for the dryer clear to prevent a buildup of steamy, hot air. Run the cleaning cycle on your washer at least weekly and clean the drains and seals regularly. Operate a dehumidifier and empty the condensation regularly.

Closets
Avoid hanging up wet or damp clothes, even if they are clean. Leave closet doors open to permit air conditioning to pull moisture from the air in those confined spaces.

Kitchen
Run the exhaust fan when cooking, especially if boiling liquids or sauteing. Hang up dish towels and dishcloths. Throw a few ice cubes into the garbage disposal to dislodge food particles and rinse thoroughly. Check the drain pan under the refrigerator for standing water or leaks. Ice maker lines should be inspected regularly.

Bathroom
This is another place that requires regular operation of the exhaust fan. Wipe down the shower and bathtub after use and hang up towels. Keep the door open to let cooled air from your AC to reduce moisture.

Air Conditioning
Make certain the size of your system fits the area to be cooled. Overdoing the capacity of the unit results in the AC shutting off before enough humid air in the home passes over the condenser coil. The small amount of water collected does not drain away and reenters the air, increasing the ambient humidity.

If you struggle with stubborn mold growth give SERVPRO of Arlington a call at (904) 721-2230. A mold remediation team will contain and remove the current growth. You have the power to limit recurrence by using the above hints.

Check out Arlington, Florida click http://www.visitjacksonville.com/areas/arlington/.

Taking Care of Mold Damage Properly in Your Arlington Home

3/21/2017 (Permalink)

Mold Remediation Taking Care of Mold Damage Properly in Your Arlington Home Mold Remediation Needed When the Fungi Look Like this on Your Arlington Home Wall

SERVPRO Remediates Mold on a Case by Case Basis

As a homeowner, when you experience even a small amount of water seeping into your home from a broken pipe or flooding, you need to be worried about if you have a mold problem or not. Not a lot of water is required for mold to grow and spread, doing lots of harm. All mold needs is a bit of moisture and some darkness, and it quickly grows. The dormant spores become active.

If you experience a double whammy of flooding and power outages from summer storms, you are even more susceptible to mold and mold damage in your Arlington home. These situations create dark, warm, and humid environments, conditions where mold and mildew thrive. You may not even know it is there since very porous materials such as carpeting, carpet padding, and insulation inside walls can conceal the mold right under your nose. Therefore, if you have had any water damage, you need the professionals at SERVPRO to check for mold as well.
 
Water Damage Needs to be Dried Quickly
The sooner our technicians are called to your home to clean up after water intrusion has occurred, the quicker they can help to prevent mold from growing under your carpet and inside your walls. Less moisture, less chance of mold growth, is a simple fact.
 
We first remove the water quickly, using professional grade machines to get as much of the standing water out as possible. We then use fans and dehumidifiers to complete dry out the areas which are water-damaged. The process can take several days, and the equipment is monitored and moved as needed to make sure the drying goes as fast as possible and also helps to circulate fresh air into your home.
 
Carpeting is properly cleaned, sanitized and deodorized. The amount of standing water dictates the outcome of drying, whether the fibered floor coverings can be salvaged. We always attempt to restore, not replace elements within the home.
 
We thoroughly check for any signs of mold as well--visual staining and odors are indicators without the use of devices. We have moisture detectors which we can use to find mold hidden inside walls or behind other covered areas you may have missed. Mold remediation starts with moisture extraction, removal of contaminated surfaces which are non-salvageable, prevention of cross-contamination, and eventually disinfecting to secure the health of your family and the protection of your structure.
 
You can always trust SERVPRO Arlington of to find and take care of any mold in your home. When you call us at (904) 721-2230, mold does not stand a chance against our professional service.

Information Concerning Mold Damage In The Jacksonville Area

2/22/2017 (Permalink)

Mold Remediation Information Concerning Mold Damage In The Jacksonville Area Mold in Jacksonville? Call SERVPRO for Remediation

SERVPRO Advises to Let a Professional Company Remediate Your Jacksonville Area Mold Issue


For families, staying warm and cozy provides them with an excellent time to take a break, and escape their daily lives. However, for mold, it produces the ideal opportunity to grow, taking advantage of humid conditions that exist to invade your home.


A disturbing and potentially toxic substance, mold, is an environmental fungus that often thrives in warm temperatures, that spreads rapidly in humid, damp areas causing mold damage throughout your Jacksonville area home. The kind of damages that require professional assistance to recover from in most cases.
 
At SERVPRO we find that mold exists everywhere, often lingering in the dark, hidden areas until the right conditions exist for it to grow. When the spores take hold, they can grow on practically any surface, including the wallpaper, wood trim, or drywall, often forming on your walls, ceilings, and inside of your ventilation ductwork.
 
Mold is notoriously quick in spreading throughout your home, taking as little as 24-hours to begin forming colonies that cover everything in their path, including your clothing, window treatments, and upholstered furniture. You could easily come home after spending the weekend visiting friends and find that mold spores decided to move in during your absence.
 
There is a lot of mold damage information available on the web, concerning treatment methods and DIY procedures, most of which contain some pretty awful advice. For instance, you need to understand that purchasing a mold home test kit is unnecessary. Anyone who tells you that identifying your mold is required only wants to take your money.
 
SERVPRO can give you the information to handle a mold remediation situation correctly on your own if you wish. However, you need to understand that if you perform any stage of the process incorrectly, it is possible to end up causing significantly more damage than when you began. Do you have the equipment, the cleaning and disinfecting agents, and more? Be safe and let us do the work for you.
 
SERVPRO services exist to provide you with a resource for tackling these kinds of situations where it becomes unnecessary for you to get involved personally and risk exposure. Leave these cases in the hands of a professional company committed to helping you recover from even the toughest challenges.
 
Our team responds quickly, using years of experience and expertise to identify both the mold infestations that are in plain view and those that lurk in the hidden areas of your home. Using the latest techniques and professional-grade equipment, we prevent mold from spreading throughout your property, remove mold-infested materials, and clean the impacted areas to help avoid future growth.
 
Give SERVPRO of Arlington a call immediately if you suspect mold growth is becoming a problem on your property. (904) 721-2230

Humidity Control A Key Component of Mold Damage Remediation

1/13/2017 (Permalink)

Mold Remediation Humidity Control A Key Component of Mold Damage Remediation To reduce the moisture content of the air within your home, make sure all exhaust fans are working properly in high moisture.

A Major Component of Mold Remediation is Humidity Control

When you live in a subtropical area, like the south Atlantic region of the United States, the high humidity both outside and inside can have consequences far beyond personal discomfort. Given the right combination of free floating microbial particles and ambient moisture, the interior of your home can exhibit significant mold damage, even without leaky pipes or a damaged roof. SERVPRO technicians can help you evaluate whether the mold damage you are experiencing in your home is traceable to simple high humidity or if other sources of water need to be uncovered. We also then will work with you to use a variety of techniques to reduce the moisture levels of the air within your house so that fungal growth will be reduced, slowed, and then halted.
 
Existing microbial colonies and mold damage linked to high humidity in Jacksonville should be treated with the EPA approved protocol to remove from areas they infest. Our SERVPRO mold remediation technicians are well trained in this best-practices methodology. Containment, cautious but thorough removal, and proper disinfection will bring the microbial activity to a baseline where no current growth is expected. As long as you are careful to monitor the humidity after the protocol is followed mold proliferation should cease.

The level suggested for the interior relative humidity of your home should measure is 60 percent or less to discourage mold growth. Do not guess to maintain this level, particularly if you have just battled back from a mold infestation. Invest in a good quality hygrometer to be certain your humidity levels are within the parameters that will discourage mold growth.
 
To reduce the moisture content of the air within your home, make sure all exhaust fans are working properly in high moisture generating rooms like the kitchen, bathroom, and laundry areas. Be sure all family members are using them regularly when cooking, showering, and washing clothes.

Dryers must vent to the outdoors. Run air conditioners regularly as they work largely by removing moisture from the air. Eliminate the use of vaporizers or humidifiers in the house. If all of these measures do not reduce the humidity to proper levels, invest in one or more dehumidifiers to get to and then maintain that 60 percent standard. Be sure all equipment used to reduce the humidity is checked for proper drainage of the water removed from the air. Empty the water condensed as needed or set the machine up to discharge into a sink or drain. Keep everything scrupulously clean so that mold does not begin growing within the very system you have set up to reduce humidity.
 

 

Locally Owned Company with National Resources

SERVPRO of Arlington can help remove mold damage and advise on how to avoid future growth. Call our dispatchers at (904) 721-2230 for an evaluation at your convenience.

The Ingredients for Mold Growth in American Homes

12/1/2016 (Permalink)

Mold Remediation The Ingredients for Mold Growth in American Homes Don't let Mold Damage keep you down, call the experts at SERVPRO to make it “Like it never even happened.”

Mold spores are everywhere, permeating the air as microscopic particles of dust, impossible to fully control. A building is never truly absent of mold, as it will always contain at least a few spores laying dormant until they can find suitable growing conditions. Mold, while overall a very flexible, durable, and difficult to remove form of life, nonetheless requires a few key ingredients for it to grow properly. Unfortunately, most homes end up containing all three major factors, making mold a common calamity among American households and one of SERVPRO's most-reported issues.
 
Water
 
Water is the most important factor in mold growth, if only because it is the only one that can be controlled in your home. Preventing mold damage in Jacksonville is mostly reliant on keeping water controlled in a home, and quickly removing any extra water to keep things dry. When wood, tile grout, or other materials become soaked in water, they can retain that water for a long time unless powerful machines such as the air movers used by SERVPRO are used to dry materials out. In this way, water can take a very long time to contribute to mold growth.
 
Warmth
 
Mold doesn't usually grow in conditions that are either too hot or too cold, preferring to lay dormant until suitable temperatures are found. Unfortunately, most types of mold prefer the same temperatures as humans, meaning your climate-controlled home is an excellent spot for growth in any season.
 
Food Sources
 
Mold also needs a food source and surface to grow on, and this must be organic in nature. In the average home, there are many potential places and materials for mold to grow on, including wood, drywall, fabric, leather, carpeting, and more. Although mold growth is slow on some of these materials, keeping them dry is the only way to ensure that mold won't start growing on them.
 
SERVPRO of Arlington is a local damage restoration company with the tools and experience to handle even the worst cases of mold damage. If your home has taken mold damage, call us at (904) 721-2230 for our services.

Common Materials for Mold Damage

9/29/2016 (Permalink)

Mold Remediation Common Materials for Mold Damage In our homes, there are a large number of materials and objects that can foster mold growth.

Materials That Can Promote Mold Growth

Mold requires an organic food source to live on, in order to fuel its physical growth and reproductive processes. In nature, this is usually a tree or stump, or perhaps a dead or left-behind organism or its waste. However, in our homes, there are a large number of materials and objects that can foster mold growth. Humans and mold often share the same needs and materials, and some of the most-used parts of your home may be the perfect spot for a mold colony in waiting. At SERVPRO, we train our technicians to know about all the nooks and crannies that mold tends to favor so that we can flush it out thoroughly when sent in.
 
Wood
Wood homes often have the most potential locations for mold damage in Arlington. Wooden siding, walls, and floors are all not uncommon in the community, and each of these can develop significant amounts of mold growth. Furthermore, even if wood is not a primary material of the home, a home will usually utilize wooden columns, supports, window frames, cabinets, interior walls, and other features.
 
Fabrics
Fabrics are common throughout American homes, and in each of their common forms, they may develop mold growth. Fabrics make up our carpets, furniture, sheets, lamp shades, and more, and at the core of every fabric is a woven organic material which easily absorbs water. This makes fabrics of most types a hotbed for mold growth. At SERVPRO, we're always careful to make sure that fabrics are cleaned thoroughly, as shallow cleaning jobs can still hide small patches of mold.
 
Drywall and Building Materials
In addition to wood, many base materials of your home may be organic in nature or have an organic component. The most common example may be drywall, which is a common feature throughout many homes and is highly susceptible to mold growth. Fortunately, these surfaces are often a bit easier to clean than other materials, although they may be harder to find.
 
SERVPRO of Arlington is a locally owned and operated business with national resources to help relieve any local home or business of its mold problems. Call us 24/7 for services or a quote at (904) 721-2230.

Mold Damage can harm your home

3/23/2016 (Permalink)

Mold Remediation Mold Damage can harm your home Mold Spores

Who would you call if you found Mold? 

Some things about mold many people do not realize is that the spores, from which all molds come, are present everywhere, inside and outside. They are microscopic and have the ability to float on the air stream from place to place. Mold damage in Jacksonville can come from any location. This material is usually in your heating, and air conditioning ducts and they love moisture.

Mold can enter your home in larger than normal levels through many occurrences. One of these is a flood or a water leak. The spores can come in through an open window.

Mold spores and the growth it facilitates gets into and onto anything. Most simple cleaning and disinfection processes, undertaken throughout the week usually keep most of this at bay. However, when you have some damage occur to your home, it tips that level up above average ones, and a mold remediation company must be called in to handle the extra damage caused by this living organism. 

Mold spores need a couple of things to grow and thrive. One of these is fuel, and that is an organic material, such as wood, drywall, and fabric. The next thing it needs is warmth. It also needs moisture, provided by the water that is often the reason for looking for this dangerous substance in your home.


When you call SERVPRO, a mold remediation company, we come and begin the process of removing all of this organism, wherever they happen to be. We get air movers in to evacuate the bad air, filled with those mold spores. SERVPRO have the specialized equipment to detect even the smallest amount of moisture, even behind walls in which molds love to live.

Removing drywall to get at this growth is part of the job, and each section of cleanup is isolated from all other areas with barriers, such as plastic sheeting, to keep the contaminated air from moving to other regions. Getting it cleaned up is one thing. Not allowing it to contaminate others is also part of what some homeowners, and many cleaning companies, do not understand needs to happen in a balanced cleaning project such as this.

Powerful green technology disinfectants are used, after the organisms are physically removed to kill any residue. Any building materials that must be removed to get to these growths are also replaced by our professional mold removal technicians with new material that is not contaminated. Special formulations are also applied that help prevents re-infestation.

After locating and removing all molds present, detailed top to bottom cleaning is started. This process brings the cleanliness of the house up to your standards and provides sanitary surfaces, free of molds, germs, bacteria and other allergens.

If you have reason to expect mold is in your home, based on an earthy, musty smell from any spaces, call SERVPRO of Arlington at (904) 721-2230 to get action quick before any real damage is done.

How To Handle Household Mold Issues in Macclenny

10/27/2015 (Permalink)

Mold Remediation How To Handle Household Mold Issues in Macclenny SERVPRO Has Cornered the Mold

SERVPRO, The Reliable Mold Remediation Company Servicing Macclenny

When mold begins to grow in your Macclenny home, it can cause a wide range of unwanted issues. Mold remediation may be the answer. For example, ongoing exposure to mold can cause health challenges. Additionally, mold can negatively impact the structural integrity of your residential property. Despite the challenges that can surface in light of a mold invasion, property owners who are educated on how to address the problem can limit economic and emotional stress. Learn what steps to take to handle mold on your property by reading the following advice.

1. Hire a team of mold remediation specialists to evaluate your residential property. These individuals will be able to determine whether mold is growing in your home. Bear in mind, that if you called in a qualified company like SERVPRO to inspect for a possible mold infestation, you probably sensed that a problem already existed. Has anyone in your household felt ill because of "bad air?" Is there a strong musty odor that is unmistakeably moldy in nature?  Do you see staining on walls, corners or in grout?

Mold remediation begins with locating the source of the water or moisture that is combining with a cellulose source resulting in a conducive condition for mold proliferation. By calling in SERVPRO for a
no charge evaluation, this is what you will receive.

• Industry experience
• Positive online reviews
• A proven track record
• 100% satisfaction guarantees
• Complimentary estimates
• Fair prices, ethical practices
• Excellent customer service, final inspection for your satisfaction

2. If mold activity is seen or discovered, a containment procedure using polypropylene sheeting and mechanical devices to create negative air pressure to prevent spores from spreading will be utilized. This is not always necessary, but SERVPRO comes prepared. The HVAC system must be shut down to prevent spores from circulating through the ductwork.

3. Don't try to complete the mold remediation process for yourself if there is about 10 square feet of activity or there may be hidden growth points. Mold remediation is a very serious matter concerning not only the presence of fungi colonies but also the safety factors involved in attempting removal.

4. Identify the source of the mold problem. In many cases, the issue is a leaky roof, cracked foundation, or broken pipe. By having our mold remediation specialists repair these issues, you take an important step towards preventing future mold infestations.

Call SERVPRO To Schedule Your Mold Inspection

A mold invasion is no laughing matter. In fact, mold invasions can compromise the structural integrity of your property in Macclenny as well as your physical health. To prevent these adverse outcomes from materializing, you need a team of professional mold remediation specialists working on your behalf. The team to call is SERVPRO. All of our IICRC-certified technicians possess the advanced skills and knowledge necessary to complete all aspects of the restoration process with professional quality control. We understand that a mold invasion can be nerve-wracking, and we're happy to accommodate you with excellent customer service and empathy as we remove the unwanted fungi.

Locally Owned, with National Resources

We live and work in Macclenny too; we might even be neighbors. As a locally owned and operated business, SERVPRO of Arlington is close by and ready to respond to your mold damage emergency also in San Marco and St Nicholas. We are proud to be an active member of the Macclenny community. Call us for help. (904) 721-2230

How to Keep Arlington Schools Mold Free During Humid, Summer Months

3/12/2015 (Permalink)

Mold Remediation How to Keep Arlington Schools Mold Free During Humid, Summer Months For that reason, school administrators should always be vigilant that the indoor air quality of their building is healthy and safe.

How to Keep Schools Mold Free During Humid, Summer Months

Indoors and outdoors, mold is always around. This resilient little spore is floating in the air, growing on the ground, and may even be present on indoor surfaces. While microscopic amounts of mold in Starke generally aren't harmful, larger populations can cause serious health problems in those with allergies or weakened immune systems. For that reason, school administrators should always be vigilant that the indoor air quality of their building is healthy and safe.

Why humidity is a problem in the summer

Humidity can be a concern year round, not just the summer. However, it's during summer vacation that schools are likely to turn off HVAC systems in order to save money. Many don't realize that an HVAC system doesn't just keep the temperature to a comfortable level; it keeps the humidity in check too. Thus, by turning off the HVAC system, school administrators could be creating the perfect opportunity for a mold problem in Starke

What mold needs to grow

The conditions for mold to grow exist just about everywhere; after all, mold can grow on just about any surface. As a result, all that Starke mold is waiting for is high enough humidity. The CDC recommends that indoor humidity be kept to 50% or lower at all times to prohibit mold growth. If the humidity stays too high for too long, mold will grow.   

Watch for key problems areas

Thankfully, there might be a middle ground here for schools. Rather than running the HVAC system night and day, school administrators can instead track humidity levels. Once the humidity gets too high, the HVAC can be turned on, or a dehumidifier can be used to literally pull moisture out of the air. Additionally, mold-prone areas, like kitchens, bathrooms, and windows should be carefully watched for mold growth. 

Hire a professional mold cleanup team

Should mold be found, it's best for school administrators to hire a professional cleanup team. The Starke mold remediation process can be complex and even dangerous. Inexperienced hands can spread spores or miss problems areas. In the end, this could make the problem much worse, raise the overall costs of repairs, and put the health of those in the building at risk.

Mold Remediation

Mold can present serious health concerns and can spread quickly through your home or business if left unchecked. SERVPRO of Arlington Professionals utilize proven mold remediation techniques and state-of-the-art equipment to protect you and your property. SERVPRO Professionals can assist you with:

Mold Damage Jacksonville - Mold Removal FAQ

12/17/2014 (Permalink)

Mold Remediation Mold Damage Jacksonville - Mold Removal FAQ To remove mold damage, you need to also correct the cause to prevent future occurrences.

The dangers of mold and mold removal have been a known topic in almost everywhere you go. But what are your views about it?

True, everyone is entitled to his or her own opinion. However, having the knowledge about the causes and effects of mold and the significance of mold removal is something that we should consider. You might hear some people say that mold is deadly. They are simply exaggerating on what they know and it is not true.

The fact is that if there is mold inside your home, you would need to get a mold removal consultation. Mold does not appear on homes for no reason. Other home issues that need to be corrected cause it. In order for mold to exist, it needs water or a high humidity level inside a home.

Another fact is that only a doctor can determine if a person’s health is at risk or not. People differ in tolerance levels with to exposure to bacteria, toxins, and other airborne materials. Nevertheless, young children (age below 18), pregnant women, elderly, chronically ill and immune compromised persons are at a higher risk when exposed to mold. An expert on mold removal service is required for such cases.

Do I Need To Test My Home for Mold?

There are various factors that can help you determine if you need a mold removal service. These include the visible presence of mold, a strong musty odor, and health issues with symptoms that are difficult to identify. If these factors are experienced or observed at home, a test or inspection from a Certified Indoor Environmentalist or Industrial Hygienist is required. You can find a qualified Indoor Air Quality expert in your area by using your favorite search engine online or you can also visit www.iaqa.org.

I heard about some companies providing mold testing and mold removal services at the same time. It sounds like a good idea to have one company to handle everything. What do you think?

Though it might be a good concept for your convenience, it is not recommended. A system of balances and checks is needed to make sure that the work is properly done. Typically, contractors would advise you to hire an Indoor Environmental Professional to test your home for mold and another remediation contractor to perform the mold removal. Both parties should have no financial or business interest with each other. This allows the homeowner to have a system of balances and checks to make sure that the work was handled correctly and the home was restored to its healthy state.

Normally, the project should be handled in a manner described below:

- A CIE (Certified Indoor Environmentalist) or CIH (Certified Industrial Hygienist) conducts a visual testing and inspection of the home for mold damage in Jacksonville and send the samples to a certified laboratory for final analysis.

- Based on the results, the CIE or CIH will create a protocol on what work is required and other special instructions.

- A certified mold remediator or CMR will perform the required work in strict compliance to the protocol. For more information on protocol, visit www.iicrc.org.

- Once the work is done, the CIE or CIH will conduct another inspection and post-clearance testing and will send samples to an third party laboratory for testing.

- The CMR will receive a notification if the post-clearance test passed or if an additional work is required.

Is there any kind of spray that I can use to kill mold? If yes, can I do it myself?

As mentioned earlier, there are certain factors that cause mold to grow. If these factors are not corrected, mold will continue to grow or reappear, which can cause further mold damage. On the other hand, there are several topical sprays that can help eliminate mold. However, it is very risky for an average and untrained person to use it for mold damage without the proper equipment and training. There are also some contractors who use spray to remove mold. However, the disadvantage of using spray is that it leaves a stain that would indicate that there has been a mold problem existed in the home, which makes it an issue if ever you will sell your home in the future.

SERVPRO of Arlington is locally owned and operated and serves Jacksonville, Macclenny, Starke, Keystone Heights, St Nicholas, and the surrounding communities

SERVPRO of Arlington’s fully certified water removal staff can perform a complete damage assessment to your home of office, and then recommend and follow the industries standards to get your water removal restoration repaired properly available 24 hours a day 

Mold Growth and Mold Remediation

9/17/2013 (Permalink)

Mold, or should we say mold spores, are VERY common in the household and work place.  Most mold spores can be handled by your immune system.  However, even if it does not seem sever, you can experience symptoms of mold, including:

Nasal congestion, Cough, Eye Irritation, Sneezing and headaches, just to name a few.

Nutrients, moisture and time - all the ingredients of an evironment ready to breed mold spores.  Mold can produce a variety of smells and textures.  There are several prime locations for these mold spores to thrive, like inside of walls, or under carpet.  Essentially most places that are void of sunlight...but not limited to dark areas. 

We would love to show you how we can do step by step process to remove mold from your office or home.  Call us today for more details on how to make your air more healthy!